uni.btn I/F 2-g KNX

Item condition	New
Brand	Gira
Categories	Sensors
Country of origin	DE
Harmonized System Code	8542 3190 00
Mounting method	Flush mounted (plaster)
Number of inputs	2
Bus system KNX	Yes
Bus system radio frequent	No
Bus system Powernet	No
With bus connection	No
Width in number of modular spacings	0
External signal voltage necessary	No
Other bus systems	None
Bus system LON	No
Input voltage	NA V
LED controlling	No
Degree of protection (IP)	IP20
With LED indication	No
Bus system KNX radio	No
Radio frequent bidirectional	-
Bus module detachable	-
Min. depth of built-in installation box	0 mm

Packing level 1	4010337118008
Packing level 2	4010337118008

Universal button interface, 2-gang for KNX Flush-mounted binary inputs, can be used in deep device box (60 mm deep) behind a conventional switch push button, for connection of zero-voltage contacts. The switching operations of zero-voltage contacts are converted into KNX telegrams. The inputs can be assigned various functions or blocked independently of each other in the process. The inputs can be parameterised as outputs (max. 2 mA). Features: Blocker for blocking individual inputs. Behaviour upon bus voltage recovery can be configured separately for each input. Telegram rate limit. Two independent switching objects are available for each input and can be released individually, command for leading and trailing edge can be set independently (ON, OFF, CHANGE, no reaction), cyclical transmission of the switching object depending on the edge or depending on the object value can be selected. Single-surface and double-surface operation, time between dimming and switching, and dim-step size can be set, telegram repetition, and stop telegram transmission possible. Command can be set with rising edge (no function, UP, DOWN, CHANGE), operating concept can be configured (Step - Move - Step or Move - Step), time between short and long-term operation can be set, slat adjustment time can be set. Value transmitter and light scene auxiliary unit function:: edge (button as NO contact, button as NC contact, switch) and value with edge can be configured, value adjustment with button by pressing and holding button for value transmitters possible, light scene auxiliary unit with memory function and saving of the scene without previously calling up is possible. Temperature value transmitter and brightness value transmitter function:: edge and value configurable, value adjustment with push button is possible by pressing and holding button. Pulse counter function:: edge for pulse counting and interval time for meter reading transfer can be configured, edge of the synchronisation signal for resetting the meter reading and switching telegram when synchronisation signal arrives can be set. Function of switching counter:: edge for counting the signals at the input and maximum meter reading selectable, increment for the counter reading output and telegram when the maximum meter reading is reached can be parameterised. Function as switching output:: Behaviour in case of bus failure and return, switch-on off delay or time switch function, output clocking (flashing of an LED). 2-gang flush-mounted binary input The two inputs can be assigned various functions or blocked independently of each other in the process. Both inputs can be configured as outputs (max. 2 mA). Free assignment of the functions switching, dimming, blind and value transmitter to both inputs or pulse counters and switching counters.