Single-phase energy meter, without approval
In stock price (excl. VAT):
34,71 €
This price is valid until 2024-12-31 or while stock lasts
Price per m:
34,71 €
EAN: 4010312501702
MPN: 28032615
Our warehouse:
Yes
Vendor stock:
No
Per package:
1
Per box:
1
Per pallet:
N/A
Technical data
| Item condition | New |
| Brand | ELTAKO |
| Categories |
Electric meters |
| Country of origin | CN |
| Harmonized System Code | 9028 3011 00 |
| Mounting method | DRA (DIN-rail adapter) |
| Width | 18 mm |
| Height | 82 mm |
| Depth | 58 mm |
| Frequency | 50 Hz |
| Max. current (Imax) | 32 A |
| Width in number of modular spacings | 1 |
| Degree of protection (IP) | IP20 |
| Pulse rate | 2000 Imp/kWh (kvarh) |
| Pole type | Single phase |
| Nominal voltage (Un) N-L | 230 V |
| Nominal current (In) | 5 A |
Packing details
| Packing level 1 | 4010312501702, 4010312501702 |
| Packing level 2 | 4010312501702 |
| Packing level 3 | 4010312501702 |
Downloads
Other Technical data
| Model | Direct measurement |
| Suitable for | Purchase |
| Type of indication | Digital |
| Number of positions total (counter) | 7 |
| Type of meter | Electronic |
| Type of interface | Other |
| Energy type | Effective power |
| Tariff type | One-tariff |
| Escapement mechanism | Yes |
| Calibrated | No |
| Pulse output | Optic |
| Pulse type | S0 |
| Accuracy class | B |
| Measurement type load profile | - |
| EEC40 signature | - |
| With lock code | No |
| Nominal voltage (Un) L-L | 230 V |
Description
Maximum current 32A. Standby loss 0.4 watt only. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide and 58mm deep. Accuracy class B (1%). With S0 interface. It measures active energy by means of the current between input and output. The internal power consumption of 0.4 watt active power is neither metered nor indicated. Like all meters without declaration of conformity (e.g. MID), this meter is not permitted for billing. Every 30 seconds, the display switches for 5 seconds from the accumulated active energy in kWh to the momentary consumption in watts. 1 phase conductor with a max. current up to 32A can be connected. If the anticipated load exceeds 50%, maintain an air gap of ½ pitch unit to the devices mounted adjacently. If necessary, use spacer DS12. The inrush current is 20mA. The display can only be read when the power supply is on. However, the consumption is saved to a non-volatile memory and is displayed immediately after power restoration. Two N terminals for secure cross wiring of several counters. The digital display has 7 digits. Two decimal places are indicated up to 99999.99 kWh. Above 100000.0kWh there is only one decimal place. Power consumption is shown by a bar flashing at a rate of 1000 times per kWh. Error message: In the event of a connection error a LED in the display flashes.
